Fujitsu Primergy RX100 S5 User Manual

RX100 S5 Operating manual 7
1 Preface
The PRIMERGY RX100 S5 server is an Intel-based server for small and
medium-sized networks and can be used in the rack systems made by Fujitsu
Siemens Computers GmbH and in current standard rack systems made by
various other manufacturers.
Thanks to its highly developed hardware and software components, the
PRIMERGY RX100 S5 server offers a high level of data security and availability.
These include the ServerView server management software, Prefailure
Detection and Analysis (PDA) and Automatic Server Reconfiguration and
Restart (ASR&R).
Security functions in the BIOS Setup and on the system board protect the data
on the server against manipulation. Additional security is provided by the
lockable rack door.
The server occupies 1 height unit in the rack.
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the infor-
mation you need to put your PRIMERGY RX100 S5 server blade into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.

Fujitsu Primergy RX100 S5 Specifications

General

Processor cache	1 MB
Processor cores	2
Processor family	Intel Pentium Dual Core
Processor frequency	2.2 GHz
Processor cache type	L2
Processor front side bus	800 MHz
Number of processors installed	1
Hot-swap	Yes
HDD interface	Serial ATA
Optical drive type	DVD Super Multi
Total storage capacity	0 GB
Memory slots	4
Internal memory	1 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	8 GB
Memory layout (slots x size)	1 x 1 GB
Networking features	Gigabit Ethernet
USB 2.0 ports quantity	5
Ethernet LAN (RJ-45) ports	3
Power supply	350 W
Power requirements	100 - 127V/200 - 240V@50 - 60Hz
Redundant power supply (RPS) support	No
Dimensions (WxDxH)	430 x 560 x 42.5 mm
Compatible operating systems	Microsoft Windows Server 2008/Server 2003, NovellSUSE Linux Enterprise Server, Red Hat Enterprise Linux
Chassis type	Rack (1U)
Operating temperature (T-T)	15 - 35 °C
Operating relative humidity (H-H)	10 - 85 %
Certification	GS CE CSAc/us ULc/us FCC Class A CB RoHS WEEE VCCI CCC C-Tick BSMI

Weight and Dimensions

Weight	12000 g