RX100 S5 Operating manual 57
Starting up and operation Controls and indicators
5.1.1.2 Indicators on the control panel
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView S2 and its
status reported to ServerView S2.
Power-on indicator (green/orange/yellow)
Lights up green when the server is switched ON.
Flashes green when the system is in standby mode.
Lights up orange when the server is in shutdown mode (operating
system shutdown) or is switched off.
Lights up yellow during power-on delay.
Hard disk activity indicator (green)
Lights up green when an internal hard disk drive is accessed.
To Next Page
Loading...
