RX100 S5 Operating manual 23
2 Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê First of all, it is essential that you familiarize yourself with the safety infor-
mation in chapter “Important information” on page 25.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note (see section “Unpacking the server” on page 40).
Ê Transport the server to the place where you want to set it up.
Ê Make sure that all necessary manuals (see “Documentation overview” on
page 8) are available; print out the PDF files if required.
Ê Fit the server in the rack (see section “Installing/removing the server in/from
the rack” on page 41).
Ê Wire the server. Follow the instructions in sections “Connecting devices to
the server” on page 51 and “Instructions for connecting/disconnecting
cables” on page 54.
Ê Connect the server to the mains (see section “Connecting the server to the
mains” on page 53).
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section “Controls and indicators” on page 55).
To Next Page
Loading...
