66 Operating manual RX100 S5
Switching the server on and off Starting up and operation
Other On/Off options
In addition to the On/Off button, the server can be switched on and off in the
following ways:
– Specified switch on time / switch off time
The server is switched on or off at a time specified in the ServerView S2
program.
– Ring indicator
The server is switched on by an internal or external modem.
– Wake up On LAN (WOL)
The server is switched on by a command via the LAN (Magic Packet
TM
).
– After power failure
The server is automatically switched on following a power failure (depending
on the BIOS settings).
– Power button override
The server can be switched off immediately by pressing and holding the
On/Off button (approx. 4-5 sec.).
V CAUTION!
There is a risk that data may be lost.
– iRMC S2
iRMC S2 offers various options for switching the server on and off, e.g. via
the Power On Oss page of the iRMC S2 Web interface.
To Next Page
Loading...
