Fujitsu ScanSnap iX500

Replacing the Roller Set
455
6. Close the ADF top section.
D It clicks when it returns to its original position.
7. Connect the power cable, and turn on the ScanSnap.
8. Reset the Roller set counter.
1. Select [Check consumable status] from the Right-Click Menu.
For details about the Right-Click Menu, refer to "Right-Click Menu (Windows)" (page
37).
D The [ScanSnap Manager - Check consumable status] dialog box appears.
2. Click the [Reset] button for [Roller Set Count].
D A confirmation message appears.
3. Click the [Yes] button.
D The counter turns "0".
ADF paper
chute (cover)
ADF top
section