112
4. Click the [OK] button.
⇒ The [Scan2E-mail - Options] dialog box is closed.
5. Click the [OK] button.
⇒ The [ScanSnap Manager - Scan and Save Settings] dialog box closes.
Operation
6. Load the document on the ScanSnap.
7. Press the [SCAN] button .
⇒ Scanning is started.
⇒ When scanning is complete, a preview window appears.
(You can change settings not to display a preview window.)
HINT
Changes you have made in the above procedure take effect from the next time
you scan documents using the Left-Click Menu.
For details on how to change settings, refer to section "4.3 Saving Scanning
Settings" (page 70).
For details, refer to sections "3.2 Paper Sizes of Documents to be Scanned"
(page 38) and "3.3 Loading Documents" (page 40).
To Next Page
Loading...
