122
Print options
You can change settings as follows:
Copies
You can specify the number of copies you want to print.
Select a number between 1 and 99.
Same size/Scaling down
You can select an output size of images; you can fit output images to paper
size or print them in original size.
Shrink to paper size:
Images larger than a paper size are scaled down to the paper size so that the
whole image can be printed on a sheet of paper. Images smaller than a page
size are printed in their actual sizes (same size).
Same size:
Images are printed in their original sizes.
[Allow automatic rotation] checkbox
Images are rotated according to the length-to-width ratio of images so that
they can be printed in either portrait orientation or landscape orientation,
whichever best fits.
[Center the image and print] checkbox
Images are centered and printed.
[Keep data used for printing as files] checkbox
PDF files are saved in a folder specified in the [Image saving folder] drop-down
list on the "[Save] tab" (page 54) of the [ScanSnap Manager - Scan and Save
Settings] dialog box.
[Do not show this dialog again] checkbox
You will not see the preview window from the next time.
You can skip step 7.
[Print] button
Clicking this button prints images using settings configured in this dialog box.
[Cancel] button
Clicking this button cancels all changes made in this dialog box and returns you to
the previous window (the ScanSnap Quick Menu Mode).
[Help] button
You can view Help topics related to the preview window.
⇒ Printing is performed.
ATTENTION
• Once the ScanSnap Quick Menu is displayed, the ScanSnap does not work
until the [Scan2Print] dialog box is closed, even if you press the [SCAN]
button. Complete the action before scanning another document.
• Do not move, delete, or rename files in other applications after the ScanSnap
Quick Menu is displayed and before the [Scan2Print] dialog box is closed.
To Next Page
Loading...
