2.3 Terminal unit, IC-215
2-24
Table 2.3.7 [F8]-2 System Setup menu (abstract)
IP Address
Subnet mask
Note) When OFF is selected in DHCP setting.
ON
DHCP
OFF
Network
Gateway
SMTP Enable IP Address
Send Limit Size(KB) 2, 4, 6, 8, 10, 16, 32
UUENCODE
Attach
BINARY
PC Mailer
Delivery To
Server
Server IP
FIXED
Address Mode
Auto
Mail Address Note) When FIXED is selected in Address Mode
Mail Gateway
Mail Address Keyword Note) When Auto is selected in Address Mode
** Network ** (Refer to AP-4)
IP Address/Subnet Mask
Default settings are as below.
IP address: 172.31.16.1
Subnet mask: 255.255.0.0
DHCP(Dynamic Host Configuration Protocol)
With DHCP turned on, IP address and subnet mask are automatically assigned when a
DHCP server resides on a LAN. The default DHCP setting is OFF.
Gateway
Set gateway IP address when mail is sent from a PC on a different network through a router.
** Mail Gateway ** (Refer to AP-4)
SMTP Enable IP Address
Specify the IP address of the PC which is to be used to send and receive e-mail. A PC not
specified cannot send e-mail but it can receive e-mail. If no IP address is specified, all PCs
connected to the LAN can send and transmit e-mail.
Send Limit Size(KB)
To choose maximum message size to send within shipboard LAN. The choices are 2, 4, 6, 8,
10 and 32 (KB).
Attach
Using the default setting, mail (MIME encoded) sent from a PC in a network is encoded
with UUENCODE. For Inmarsat C use UUENCODE.
To Next Page
Loading...
Need help?
General
