GAT Access 6100 Terminal Series
Installation
www.gantner.com
HB_GAT-ACCESS6100--EN_14
33
5. The remaining installation procedure is the same as described in section “a) Installation in Brickwork Walls”.
ATTENTION!
Humidity/water must never be able to penetrate into the housing. Ensure that the silicone applied (step 1 of section
“3.7.1 Surface Mounting") completely seals the housing and that the rubber seal (step 4 of “3.7.1 Surface Mounting”)
is inserted correctly and completely seals the entire length of the housing.
To Next Page
Loading...
