GAT Access 6100 Terminal Series
Updating the GAT Access 6100
www.gantner.com
HB_GAT-ACCESS6100--EN_14
83
• The update wizard uploads the update to the GAT Access 6100. This process usually takes around 1 – 2 minutes
depending on this size of the update, network speed, etc.
Figure 7.4 – Uploading file to GAT Access 6100
• The update wizard displays the following message when the process is finished. Click on “Finish” to close the
wizard and return to the main page of GAT Config Manager.
Figure 7.5 – Update process successfully completed
To Next Page
Loading...
