182 232003110G (03)
Keeping your LaserPro S400 clean and well maintained will ensure quality output, consistent
reliability, and extended product life. Smoke, dust or residue build-up inside the laser system or the
mechanical components can cause a reduction in the laser power, irregularities in the motion system,
reduced product life cycle, and a host of other avoidable problems. This section will cover how to
perform regular maintenance on the work table, motion system, mirrors, and focal lens.
The frequency of the cleaning schedule will depend on number of variables such as the types of
material you work with, the immediate work environment, the frequency of use, the quality of the
exhaust system, etc.
・
Electrical shock may occur if you do not turn off and unplug the S400 before cleaning.
・ Damage may occur to the system if you do not turn off and unplug the S400 before
cleaning.
・ Always turn off and unplug the S400 before cleaning!
8.1 Suggested Cleaning and Maintenance Supplies
Cleaning / Maintenance Tool
Soap Solution or All-Purpose Cleaner
DO NOT use alcohol on any painted surface,
plastic, or the laser system.
ONLY to be used on the work table
Vacuum Cleaner with a Flexible Nozzle
Only to be used in and around the work table and
motion system
Supplied 1pc. Local supply is suggested.*
*The recommended lens cleaner is Eclipse Cleaning System Solution from Photographic Solutions or
HPLC grade Methanol. Search “Eclipse Cleaning System Solution” on Amazon or eBay to get the
solution locally.
http://www.amazon.com/Photographic-Solutions-ECDCS-Cleaning-Solution/dp/B0000AUR1I
To Next Page
Loading...
