5 232003110G (03)
1.4 Safety Label
According to CDRH standards, all fixed or removable covers that allow access to a laser beam must
have an appropriate laser warning label attached to them. These warning labels must be clearly
visible to the operator prior to removing the cover. Additional labels must be applied to the interior of
the machine and be visible in the event when the covers are removed. A label clearly displaying the
manufacturer’s name, date of manufacture, description of product, model number, serial number, and
compliance statement must be attached to the outer surface of the machine.
In compliance with CDRH standards, the required warning labels are affixed at the time of
manufacture to the LaserPro S400, attached on appropriate locations. These labels are not to be
modified in any way or removed for any reason. Please familiarize yourself with the specific labels
and their locations on the machine. Below is a list of all the safety labels and their locations on the
machine.
Product
Label
This label is located at the right-back side of machine. All the product information such as Serial Number,
Model Numbers, Laser Power and Electric power can be found here. Before requiring any further tech
support, always provide the service person with the information on this label.
To Next Page
Loading...
