44 232003110G (03)
2.2 How to Re-
p
a
ck the Machine
Step 1: Set up the ramp with the base board and carefully push the machine onto the iron pallet.
NOTE: More than one person may be needed when loading and unloading the shipping crate in order to
avoid body injury or damage to the machine.
Step 2: Fasten the belts accordingly and make sure the machine is affixed on the iron plate.
Step 3: Insert four side boards on the slot of bottom plate.
Step 4: Fix the four side boards by four corner brackets.
To Next Page
Loading...
