82 232003110G (03)
Once you have installed the LaserPro USB Driver (for use with USB connection), LaserPro Print
Driver,and have connected the LaserPro S400 to your computer, you will need to familiarize yourself
with the LaserPro S400 Touch Screen and LaserPro Print Driver. The print driver will be where
specific laser parameters for your jobs are configured, while the Touch Screen will allow you to set
repeat times, manipulate file order, perform auto / manual focusing, and more.
5.1 Using the Hardware
5.1.1 Laser Key Switch
Turn the key-switch to the “ON” position BEFORE powering on the machine. If the key-switch
is turned to the “OFF” position, the laser will be disabled meaning that the laser will not fire
although the XY motion system will still move. The laser firing will need 8-10 seconds to warm
up if turning to off, and turn on later, therefore, please wait 10 seconds before pressing
STRART button for laser work.
To Next Page
Loading...
