GE iVent 201 Series - Mounting Equipment Part Numbers; Oxygen, SpO2, and Remote Alarm Parts; Humidifier and Power Cord Part Numbers

260
Figure 190: iVent
TM
201 with Old Lower
Plate Model
Figure 191: The Spacers Location on the
HS Ventilator
Figure 192: Positioning the Mounting
Plate
Figure 193: Inserting Screws into Flat
Washer and Spring Washer
NOTE The iVent
TM
201 MRI Transport Mounting Plate is an MR conditional accessory
which poses no known hazards in all MR environments as per F 2503-05.