2 Setting up
51
The CBRN filter fits into the iVent
TM
201 via an optional air inlet adapter (item
M1161967). Remove the air inlet filter from the iVent
TM
201 by turning it
counterclockwise. Then fasten the air inlet adapter to the CBRN filter by twisting
it on clockwise. Finally, screw the CBRN canister with the adapter into the air inlet
adapter.
Figure 22: CBRN Filter
OPERATIONAL CASE
With an optional soft case (item M1161883 )(Figure 23) the iVent
TM
201 can be
operated in bad weather conditions, such as rain or snow. Padding and
protected ventilation ports enable full function in a variety of situations.
Figure 23: Soft Case
THE IVENT
TM
201 USER INTERFACE
It is important to invest time to acquaint yourself with the iVent
TM
201 and how the
Control Knob is integrated with the screen and the operation of the iVent
TM
201.
Connect a test lung with an Rp20 resistor and patient circuit. Switch on the unit,
and navigate through the features discussed in this section. Rotating the Control
Knob at the menu level allows for easy, automatic selection of ventilation modes.
Choosing the best parameter for a patient is as easy as switching on the
iVent
TM
201 and selecting the patient’s ideal body weight.
To Next Page
Loading...
