GE iVent 201 Series - Page 284

272
M1161007 660A0001-12, DISPOSABLE AIR INLET FILTER, QTY. 12
M1161008
660L0001-12, DISPOSABLE LOW PRESSURE OXYGEN FILTER,
QTY.12
Mounting Equipment
M1162048
630B0004-A1, BREATHING CIRCUIT SUPPORT ARM, MRI
CONDITIONAL
M1169908 900K0015-01, MOUNTING PLATE (TRANSPORTATION KIT)
M1162051 630B0010-01, MOUNTING SYSTEM, BED RAIL
M1162050
630B0007-A1, EXTERNAL BATTERY HOLDER FOR ROLL STAND,
MRI-CONDITIONAL
M1206571 630B0013-01, Roll Stand
M1206572 325A0554-01, Cylinder Holder
M1162052 630B0011-01, MOUNTING SYSTEM, POLE
M1161734 MOUNTING BRACKET, POLE 15-50MM, 900MR030
M1162010 510S0001-A0, 6IN ROLL STAND UTILITY BASKET
M1162044
630B0001-02, ROLL STAND AND MOUNTING BRACKET, MRI-
CONDITIONAL
M1162046 630B0003-A1, OXYGEN CYLINDER HOLDER, MRI CONDITIONAL
M1174996 Suko Roll Stand Caster Kit
Oxygen
M1162017 620B0002-01, OXYGEN SUPPLY HOSE, 15FT LENGTH, DISS
FITTINGS
M1162020 Adapter For Low Pressure O2
SpO2
M1176366 611A0005-02, NONINVASIVE SPO2 FOR iVent
TM
201
M1162015 611A0005-02, SPO2 KIT, INCL CABLE AND DISPOSABLE PROBE
Remote Alarm
M1192088 375HC021-01, REMOTE ALARM BOX
M1161989 507A0052-C0, NORMALLY CLOSED NC, 51K CONNECTOR
M1161990 507A0053-C0, NORMALLY CLOSED NC, PHONE JACK CONNECTOR
M1161991 507A0054-C0, NORMALLY OPEN, NO, PHONE JACK CONNECTOR
M1161992 507A0056-B0, ALARM CABLE BNC 51K
M1199809 900A2242-01,REMOTE ALRM NRS CALL CBLE NC MONO 0.25IN 3M
Humidifiers
M1162037 620H0001-01, RESPIRATORY HUMIDIFIER KIT, M/U 220V US PLUG
M1162038 620H0002-01, RESPIRATORY HUMIDIFIER KIT, M/U 110V, US PLUG
M1162039 620H0003-01, RESPIRATORY HUMIDIFIER KIT, M/U 220V NO PLUG
M1162040
620H0004-01, RESPIRATORY HUMIDIFIER KIT, M/U 220V BRITISH
PLUG