System Setup
3-46 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Footswitch Installation (continued)
Configuring Footswitch
Footswitch supports these configurations: No Function, Rec/
Pause, Freeze, Next Heartcycle, Prev Heartcycle, Print 1, Print
2, Print 3, Print 4, Update, Next Step (Scan Assistant), Previous
Step (Scan Assistant), Scan Assistant Pause/Resume or Mark
Cine. The default setting is No Function.
Enter Utility -> Application -> Settings to configure the
Footswitch functions.
Figure 3-25. Configuring Footswitch Functions
To Next Page
Loading...
