General Procedures and Functional Checks
4-46 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Backup and Restore Database, Preset Configurations and Images
Formatting Media
To Format the backup media, DVD:
1. Go to Utility -> Connectivity -> Removable Media.
2. Select the media type from the drop down menu.
3. Enter the label for the media. It is best to use all capital
letters with no spaces or punctuation marks. Press Format.
Figure 4-20. Format and verify media
4. A pop-up message displays to inform operation completed.
Press OK.
5. If desired, verify that the format was successful by selecting
Verify in Utility -> Connectivity -> Removable Media. see
Figure 4-20 on page 4-46.
To Next Page
Loading...
