General Procedures and Functional Checks
4-56 LOGIQ e – Basic Service Manual
5461614-100 English Rev. 6
Color Printers (continued)
8. If another device has been selected, use “<<“to clear
window.
Color Printers Checks
Make sure Printer Function is assigned to P2 key.
NOTE: For checking the printer function on HP Universal Printing PCL6
Network Printer, when pressing P2, a pop-up window displays to
require you to input the Printer Address. Contact your network
administrator for local network information.
Table 4-11: Printer checks
Step Task Expected Result(s)
1 When scanning in B Mode, press
Freeze to stop image acquisition
Image scanning stops with the last image on
the screen.
2 Press P2 key on the control panel. The image displayed on the screen is
printed on Color printer, depending on the
key assignment configuration.
3 Check if the print quality is of expected
quality.
To Next Page
Loading...
