GE MAC 1200 ST

Revision C MAC 1200/1200 ST 8-7
2012250-021
Stress Tests: Stress Test Sequences
End/Cancel a Stress Test
 End or cancel the test with .
The following text appears on the MAC 1200/1200 ST display.
Press the appropriate key to confirm or cancel the test end
command.
Program Sequence for Ergometers Without Digital Interface
Confirm Stop?
Onscreen: On the keyboard:
Confirm: [Sensitivity] Use the key to stop the test.
Cancel: [Speed] Use the key to cancel the request to stop the test.
The test will continue.
mm/mV
Ergo
Arrhy
Config
Alt
Select Stress
Test Mode
Select protocol.
Check report
interval
Wait approx. 30 s
until the first ST
measurement is
completed
Automatic when
last stage is
completed, or
manual
Change load
according to
protocol.
Recovery PhaseExercise PhasePre-Test
Adjust initial load of
selected protocol
Pedal
033A