Revision C MAC 1200/1200 ST 10-13
2012250-021
System Setup: Stress Test Mode
Stress Test Mode
Report Sequence
[STANDARD] (I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6)
CABRERA (aVL, I, -aVR, II, aVF, III, VI, V2, V3, V4, V5, V6)
SEQ. NO. 3 (Here, users can define a custom report sequence.)
Position the cursor on SEQ. NR 3.
Press and create the report sequence as described in “Manual
Mode” section.
Protocol
The test protocols available for selection depend on the selected exercise
test device (see “Communication” section).
The Protocol Editor allows you to change individual test parameters or to
create your own test protocols.
First select the protocol that you would like to edit or which is similar
to the one you want to create.
To Next Page
Loading...
Need help?
General
