Revision C MAC 1200/1200 ST 10-29
2012250-021
System Setup: Patient Data Menu Setup
Patient Data Menu Setup
The patient data menu can be set up to meet individual requirements. If
you do not want to enter blood pressure readings, for instance, you can
remove the corresponding prompts from the menu.
1. Use the cursor keys to position the bar cursor on Patient Data Setup
and confirm the selection with . The patient data setup menu
will appear.
2. Select No for prompts that you want to remove from the dialog. The
following items cannot be removed.
Name
First name
Date of birth
Patient ID
3. The following items are disabled. They can be enabled from this
menu.
ID required (ID = patient ID number)
Secondary ID
Secondary ID required
Last name required
First name required
Location Number
Room
Order Number
Prompt 1 to 4
The patient ID length is configurable from 3 to [16] characters.
To Next Page
Loading...
Need help?
General
