GE MAC 1200 ST Operator's Manual

3-10 MAC 1200/1200 ST Revision C
2012250-021
Operating and Performance Tests: Connecting Peripheral Equipment
The electrocardiograph can be directly connected via the serial
interfacevto a PC (CardioSoft), to the CardioSys system, or to a MUSE
CV system.
Resting ECGs acquired in the Automatic mode, and the corresponding
data, can then be transmitted to these peripheral devices. See Chapter 5,
“ECG Transmission” section for details.
The table below shows the factory defaults and all possible adjustments.
For instructions on changing the default setup, see Chapter 10,
“Communication” section for details.
Table 2. Modem Configuration Menu
Parameter Factory Default Options
Choices for Modem —> Other
No other
MultiTech 19.2
MultiTech 56k
Elsa 14.4
Elsa 28.8
Elsa 33.6
Elsa 56k
Choices for Modem —> other
Phone Number
Initial. modem
dial string hang-up
AT&FM1X3S
0=1V0
ATDT
+++ATH
Choices for Modem —> MultiTech, Elsa
Dial mode
Phone Number
Outside line
Tone Pulse
0 to 9 (20 digits)
0 to 9 (20 digits)

GE MAC 1200 ST Specifications

General

Brand	GE
Model	MAC 1200 ST
Category	Medical Equipment
Language	English