CHAPTER 4: SYSTEM ADMINISTRATION SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 4–43
deliver notification of syslog events to the specified collector(s). How that information is
stored and displayed on the collector is a function of the software running on the collector.
There are many freely available software products to manage this task.
4.3.2.1 Syslog: Global Settings
This screen enables you to enable syslog functionality.
FIGURE 4–26: Events: Syslog: Global Settings
Table 4–24:: Logs: Global Settings describes the parameter you can configure in the Syslog:
Global Settings screen.
4.3.2.2 Syslog: Collectors
This screen enables you to specify the IP addresses of up to five syslog collectors.
FIGURE 4–27: Events: Syslog: Collectors
Table 4–26: Configure Syslog
Field Name Field Value
Mode: Indicates whether or not events should be sent as Syslog
messages. The available values are:
• Enabled – Send a syslog message for each event.
• Disabled – Do not send syslog messages (default).
To Next Page
Loading...
