4–26 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
SYSTEM ADMINISTRATION CHAPTER 4: SYSTEM ADMINISTRATION
The table below describes the information displayed in the Sessions: Active Logins screen.
4.2.9 Change Password
This screen enables you to change your password. The administrator can also change any
user’s password from the Authentication: Accounts screen, described in
Section
4.2.7.2: Authentication: Accounts
.
FIGURE 4–18: Administration: Change Password
The table below describes the parameters you can configure in the Change Password
screen.
Table 4–17: Sessions: Active Logins
Field Name Field Value
Session: A unique identifier for a session.
Username: The username that is logged in.
Client Host: The IP address of the remote client.
Login Time: The time at which the user logged in to the system.
Last Activity: The last time the user was active in the session.
Delete: Set the Delete checkbox in a row and click Apply Settings to
disconnect that active session.
Note: the last saved administrator account is always preserved.
Table 4–18: Change Password
Field Name Field Value
Old Password: Enter the old password.
To Next Page
Loading...
