CHAPTER 4: SYSTEM ADMINISTRATION SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 4–11
4.2.6.2 SNMP: Management Stations
The “SNMP: Management Stations” screen enables you to configure SNMP management
stations.
FIGURE 4–9: Administration: SNMP: Management Stations
The table below describes the parameters you can view and configure in the “SNMP:
Management Stations” screen.
Engine Boots: The number of times the system has booted since the current
engine ID was set.
Engine Time: The number of seconds elapsed since the engine ID was
changed or the system booted, whichever occurred most
recently.
Table 4–9: SNMP: Management Stations
Field Name Field Value
Add Station Form
IP Address: Enter the IP address of a management station that are allowed
to query the SNMP agent. Click Apply Settings to add this
address to the Existing Stations table.
You can specify up to four management stations.
Table 4–8: SNMP: Global Settings
Field Name Field Value
To Next Page
Loading...
