CHAPTER 1: OVERVIEW OVERVIEW
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 1–13
1.4.2 Features Summary
The table below summarizes the hardware features of the Multinet4.
The table below summarizes the features of the Multinet4.
Table 1–10: Hardware Features Summary
Feature Details
Connectivity •4 Ethernet ports
— 2 100FX multi/single mode Fiber, ST, SC, and
LC
— 2 10/100 BaseT, RJ45 Auto-Negotiation and
Auto-MDIX
OR
— 4 10/100 BaseT, RJ45 Auto-Negotiation and
Auto-MDIX
• 4 programmable RS232/485 serial ports
Power Options • High (90 -250 VAC or VDC)
• Low (24-48 VDC)
Mounting Options •Panel
• DIN-rail
• 19” rack
• 19" rack reverse
Table 1–11: Software Features Summary
Feature Details
Serial Port Management • Up to 16 serial profiles
• Serial data statistics
• RS-232 (Full/Half) & RS-485 (Full/Half) supported via software
selection
• Data rates from 1200 baud to 115200 bps
• 7 or 8 data bits
• 1, 1.5, or 2 stop bits
• Even, Odd, or No Parity
• Hardware and Software (XON/XOFF) Flow Control
• Packetization options
— Forward on specific character, idle time, or
packet size
— Turnaround timer
To Next Page
Loading...
