MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 1–1
Multinet4 Multi-Port Serial Server
& Managed Switch
Chapter 1: Overview
Digital Energy
Multilin
Over view
1.1 Configuration
The following sections describe the features and requirements of the Multinet4.
1.1.1 Connectivity
The Multinet4 is equipped with:
•4 Ethernet Ports
• 2 100FX multi/single mode Fiber, LC, ST, and SC
• 2 10/100 BaseT, RJ45 Auto-negotiation and Auto-MDIX
OR
• 4 10/100 BaseT, RJ45 Auto-negotiation and Auto-MDIX
• 4 programmable RS232/485 serial ports
These ports are all located on the front face of the device, as illustrated in the figure below.
FIGURE 1–1: Front View
To Next Page
Loading...
