4–66 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
SYSTEM ADMINISTRATION CHAPTER 4: SYSTEM ADMINISTRATION
The table below describes the parameters you can view and configure in the VLANs: Global
Settings screen.
4.4.4.2 VLAN: VIDs
This screen enables you to add and delete up to 16 VLAN IDs (VIDs). It also serves to show a
summary of the VLAN configuration.
FIGURE 4–41: Ethernet: VLAN: VIDs
Table 4–41: VLANs: Global Settings
Field Name Field Value
Mode: Indicates whether or not the switch is VLAN-aware.
• Enabled – perform ethernet switching based on VLAN tags
and configured port membership.
• Disabled – ignore VLAN tags and port memberships when
performing Ethernet switching.
Default value = Disabled
To Next Page
Loading...
