3–6 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
ENERVISTA MULTINET4 SETUP SOFTWARE CHAPTER 3: ENERVISTA MULTINET4 SETUP SOFTWARE
3.4 Using the Quick Connect Feature
If you need to start talking to a Multinet4 device quickly, Press the Quick Connectbutton,
to start the Quick Connect.
1. Click the Quick Connect button to open the Quick Connect dialog box.
2. Enter the IP address assigned to the Multinet4, then click Connect.
3. When Quick Connect device is added, it gets added under already existing first
site. If no site exists, then a new site “Quick Connect Site” will be created and
“Quick Connect Device” gets added under “Quick Connect Site”. Expand the
sections to view data directly from the Multinet4 device.
4. Each time the EnerVista Multinet4 Setup software is initialized, click the Quick
Connect button to establish direct communications to the Multinet4. This
ensures that configuration of the EnerVista Multinet4 Setup software matches
the Multinet4 device model number.
To Next Page
Loading...
