1–6 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
OVERVIEW CHAPTER 1: OVERVIEW
1.2.4 Power Requirements
The power requirements of the Multinet4 are defined in the table below.
Dry Heat Temperature EN/IEC 60068-2-2: 1994,1974 +85 deg startup for 16 hours
Humidity NEMA TS2 2.1.5 -34 to 74C, 10-95%
MECHANICAL TESTS
Sinusoidal Vibration EN/IEC 60255-21-1: 1996,1988 Class 1 - 10-150hz @2G
Shock and Bump EN/IEC 60255-21-2: 1996,1988
Class 2 - 30G bump, 17G
shock
Shock NEMA TS2 2.2.9 10G, x,,y,z axis
Vibration MIL-STD -167-1 0.5G, 5-30 Hz
FUNCTIONAL TESTS
Operating Voltage NEMA TS2 2.1.2 Max nominal rating
Operational frequency NEMA TS2 2.1.3 Nominal +/- 3Hz
SAFETY TESTS
Dielectric IEEE C37.90
2kV on Hi model & 500V on Lo
model
Dielectric IEC60255-5 2kV
H.V Impulse IEEE C37.90 5kV
H.V Impulse IEC60255-5 5kV
OTHERS
IP rating IEC60529 IP20A
Standard Name
Standard Number:Date
code
Severity levels Tested
Table 1–3: Power Requirements
High Voltage AC/DC Low Voltage DC
Voltage Input Range: 90-250 VAC/VDC 24-48 VDC
Max. Power (Watts): 27 27
To Next Page
Loading...
