CHAPTER 4: SYSTEM ADMINISTRATION SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 4–63
4.4.3.3 RSTP: Bridge Status
This page enables you to view bridge-specific RSTP counters and status.
FIGURE 4–39: Ethernet RSPT: Bridge Status
The table below describes the bridge status and counters you can view in the RSTP: Bridge
Status table.
Table 4–39: RSTP: Bridge Status
Field Name Field Value
Bridge Status: This parameter can take one of the following values:
• Root
•Designated
•Not Designated
Bridge ID: The bridge identifier, which consists of the bridge priority and
the bridge address.
Root ID: The bridge identifier of the root.
Root Port: The Ethernet port that provides connectivity towards the root
bridge for this network.
Root Path Cost: The total cost of the path to the root bridge. This is the
summation of the costs of each link in the path to the root.
Configured Hello
Time:
The locally configured Hello Time.
To Next Page
Loading...
