GE Multinet 4 - Mounting on a Panel

2–8 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
GETTING STARTED CHAPTER 2: GETTING STARTED
FIGURE 2–4: 19” Rail Reverse Mounting brackets
FIGURE 2–5: 19” Rail Reverse Mounting - Dimensional Drawing
2.3.1.5 Mounting on a Panel
The brackets for mounting on a panel attach with two screws to the screw holes located
toward the rear of the Multinet4. You can adjust the distance of the Multinet4 from the
panel to two positions by your selection of which pair of screw holes to use in attaching the
bracket to the Multinet4.
18.9in (48cm)
9.4in (23.9cm)
4.75in (12.07cm)
4.75in (12.07cm)
1.7in
(4.32cm)
1.25in
(3.18cm)
18.2in (46.2cm)
24-48V
1.3A
NON-POLARIZED
Serial No:
0650 0034
DX800-01-L-P