MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 3–1
Multinet4 Multi-Port Serial Server
& Managed Switch
Chapter 3: EnerVista Multinet4
Setup Software
Digital Energy
Multilin
EnerVista Multinet4 Setup Software
The EnerVista Multinet4 Setup software is the preferred method to edit the most common
used setting.
3.1 PC Requirements
The following requirements must be met to ensure correct operation of the EnerVista
MultiNet4 setup software:
• Pentium class or higher processor (Pentium II 300 MHz or higher recommended)
• Support Windows 2000, Windows XP and Windows Vista
• Internet Explorer 4.0 or higher
• 128 MB of RAM (256 MB recommended)
• 40 MB of available hard drive space (100 MB recommended)
• Video capable of displaying 800 × 600 or higher in High Color mode (16-bit color)
• Ethernet port and RS232 for communications to the Multinet4
To Next Page
Loading...
