GE Multinet 4 - RSTP: Port Status

4–64 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
SYSTEM ADMINISTRATION CHAPTER 4: SYSTEM ADMINISTRATION
4.4.3.4 RSTP: Port Status
This page enables you to view port-specific RSTP counters and status.
The table below describes the port status and counters you can view in the RSTP: Port
Status table.
Learned Hello Time: The actual Hello Time provided by the root bridge through
configuration BPDUs.
The learned Hello Time is used in all designated bridges.
Configured
Forward Delay:
The locally configured Forward Delay.
Learned Forward
Delay:
The actual Forward Delay provided by the root bridge through
configuration BPDUs.
The learned Forward Delay is used in all designated bridges.
Configured
Maximum Age:
The locally configured Maximum Age.
Learned Maximum
Age:
The actual Maximum Age provided by the root bridge through
configuration BPDUs.
The learned Maximum Age is used in all designated bridges.
Topology Changes: The total number of topology changes that have been detected
by this bridge since the last time statistics were cleared, or since
the device was powered on (whichever event is more recent).
Table 4–39: RSTP: Bridge Status
Field Name Field Value
Forwarding
Blocking
Blocking
Designated
Backup
Root
Alternate
200000 342 332 33 2
200000 11 2 311
200000
32
22
6
22
233 222
1
1
200000