GE Multinet 4 - Vlan; VLAN: Global Settings

CHAPTER 4: SYSTEM ADMINISTRATION SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 4–65
4.4.4 VLAN
For a discussion of VLAN configuration see 6.4.3: VLANs and Serial Ports.
4.4.4.1 VLAN: Global Settings
This screen enables you enable VLAN functionality on a switch.
FIGURE 4–40: Ethernet: VLAN: Global Settings
Table 4–40: RSTP: Port Status
Field Name Field Value
Port ID: Unique port identifier.
State: This parameter can take one of the following values:
• Disabled
• Blocking
•Forwarding
•Learning
• Listening
Role: This parameter can take one of the following values:
• Root
•Designated
•Backup
•Alternate
Cost: The cost metric associated with this port. This is automatically
determined based on the speed of the interface and the
configured cost style (32-bit or 16-bit).
Rx CFGs: The number of STP configuration BPDUs received on this port.
Rx TCNs: The number of STP TCNs (Topology Change Notifications)
received on this port.
Rx RSTPs: The number of RSTP BPDUs received on this port.
Tx BPDUs:
The number of BPDUs (STP or RSTP) transmitted on this port.