4–58 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
SYSTEM ADMINISTRATION CHAPTER 4: SYSTEM ADMINISTRATION
FIGURE 4–35: Ethernet: Bridge: Static MACs
The table below describes the uses of the fields of the Bridge: Static MACs screen.
Table 4–35:
Ethernet: Bridge: Static MACs
Field Name Field Value
Add Static MAC Address Form
Static Source
Address:
Specify the static MAC Address of a station to add it to the
bridge station cache.
MAC addresses are entered in their hexadecimal representation.
Each octet must be separated by a colon or a hyphen (e.g. 01-
02-03-04-05-06 or 01:02:03:04:05:06).
Source Port: Select a “Source Port” designation from the drop-down menu.
Existing Static MAC Addresses Table
Static Source
Address:
Lists the static MAC addresses already recognized in the system.
Source Port: Lists the source ports associated with static MAC addresses.
Entry Type: Indicates whether an entry in the table was configured by a
user or learned by the MAC security feature.
Delete: Set the “Delete” checkbox in a row and click the Apply Settings
button to delete the entry from the table and from the station
cache.
To Next Page
Loading...
