CHAPTER 4: SYSTEM ADMINISTRATION SYSTEM ADMINISTRATION
MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL 4–69
Tagged? The available options for this field have the following
significance:
• No – the port strips all VLAN tags before transmitting
frames.
• Yes – the port ensures that a VLAN tag is present in a frame
before transmission.
Default value = No
Prohibited VLANs: This is a list of VLANs to prohibit from a Trunk port. By default,
this field is blank and the port allows all configured VLANs. By
setting the Prohibited VLANs list, the user can filter certain
VLANs on the trunk. The Trunk's PVID is not allowed in the
Prohibited VLANs list for the port. This field is disabled when the
port mode is set to "Access".
Enter the VID numbers of prohibited VLANs separated by
commas. A continuous range of VIDs can be indicated by a
dash. For example:
4, 6-8, 12, 15.
Table 4–43: VLAN: Port Settings
Field Name Field Value
To Next Page
Loading...
