5–26 MULTINET4 MULTI-PORT SERIAL SERVER & MANAGED SWITCH – INSTRUCTION MANUAL
THE CLI AND PROTOCOL MONITOR CHAPTER 5: THE CLI AND PROTOCOL MONITOR
For more information see the description of web server security management in section
4.8.4: Web Server.
Table 5–18: CLI web Commands
Command Synopsis Description
set set mode http | sslonly Specify whether the server will accept non-secure HTTP
requests:
• http – Accept both non-secure HTTP (port 80)
requests and secure SSL (port 443)
requests.
•
sslonly – Accept only secure requests.
show show Display the current security setting of the embedded web
server.
To Next Page
Loading...
