GE PACSystems RX7i - Migrating Series 90 Applications to Pacsystems

Chapter 1. Introduction
GFK-2222AD April 2018 13
1.6 Migrating Series 90 Applications to PACSystems
The PACSystems control system provides cost-effective expansion of existing systems. Support for
existing Series 90 modules, expansion racks and remote racks protects your hardware investment. You
can upgrade on your timetable without disturbing panel wiring.
▪ The RX3i supports most Series 90-30 modules, expansion racks, and remote racks. For a list of
supported I/O, Communications, Motion, and Intelligent modules, see the PACSystems RX3i System
Manual, GFK-2314.
▪ The RX7i supports most existing Series 90-70 modules, expansion racks and Genius networks. For a
list of supported I/O, Communications, and Intelligent modules, see the PACSystems RX7i
Installation Manual, GFK-2223.
▪ Conversion of Series 90-70 and Series 90-30 programs preserves existing development effort.
▪ Conversion of VersaPro and Logicmaster applications to Machine Edition allows smooth transition
to PACSystems.