GE PACSystems RX7i Reference Manual

Chapter 2. CPU Features & Specifications
18 PACSystems* RX7i, RX3i and RSTi-EP CPU Reference Manual GFK-2222AD
2.1 Common CPU Features
2.1.1 Features Shared by All PACSystems CPU Models
▪ Programming in Ladder Diagram, Function Block Diagram, Structured Text and C.
▪ Floating point (real) data functions.
▪ Configurable data and program memory.
▪ Non-volatile built-in flash memory for user data (program, configuration, register data, and
symbolic variable) storage. Use of this flash memory is optional.
▪ Configurable RUN/STOP Mode switch.
▪ Embedded serial and/or Ethernet communications (refer to comparison charts in RX3i CPU
Features and Specifications, RX7i CPU Features and Specifications and RSTi-EP CPU Features and
Specifications).
▪ Up to 512 program blocks. Maximum size for a block is 128KB.
▪ Auto Located Symbolic Variables, which allows you to create a variable without specifying a
reference address.
▪ Bulk memory area accessed via reference table %W. The upper limit of this memory area can be
configured to the maximum available user RAM.
▪ Larger reference table sizes, compared to Series 90* CPUs: 32Kbits for discrete %I and %Q and
up to 32K words each for analog %AI and %AQ.
▪ Online Editing mode that allows you to easily test modifications to a running program. (For
details on using this feature, refer to the programming software online help and Proficy Logic
Developer Getting Started, GFK-1918.)
▪ Bit in word referencing that allows you to specify individual bits in a WORD reference in retentive
memory as inputs and outputs of Boolean expressions, function blocks, and calls that accept bit
parameters.
▪ In-system upgradeable firmware for CPU
▪ Indirect mechanism for upgrading firmware in backplane modules via the CPU.

GE PACSystems RX7i Specifications

General

Brand	GE
Model	PACSystems RX7i
Category	Controller
Language	English