GE PACSystems RX7i Reference Manual

Appendix A. Performance Data
262 PACSystems* RX7i, RX3i and RSTi-EP CPU Reference Manual GFK-2222AD
A-2.2 PLC Version Information
The instruction execution and incremental times were obtained by testing the following CPU versions:
Model
PLC Firmware Version
All instructions
except as listed below
RSTi-EP EPSCPE100
9.15
RSTi-EP EPSCPE115
9.45
IC695CPE400
9.00
IC695CPE305/CPE310/CPE330
7.10
IC695CPE302
9.40
IC695CPU310/CPU315
6.0
IC695CPU320/IC695CRU320
93
7.18
IC698CPE010/CPE020
6.0
IC698CRE020
6.0 (with ECC enabled)
IC698CPE030/CPE040
6.0
IC698CRE030/CRE040
6.0 (with ECC enabled)
MOVE_UINT
CPE010/020
3.5
CRE020
93
2.04 (with ECC enabled)
SVC_REQs for Redundancy
IC695CRU320
93
6.0 (with ECC enabled)
TON, TOF, TP Instructions
CPU310/CPU315/CPU320, CRU320
5.7
CPE010/CPE030/CPE040
3.6
CRE030/CRE040
93
3.6 (with ECC enabled)
Instructions for PACMotion
CPU315/CPU320
5.6
CPU310
6.0
93
Due to Error Checking and Correction (ECC), Redundant CPU times are approximately 5% slower, on average, than the
equivalent Non-Redundant CPU.

GE PACSystems RX7i Specifications

General

Brand	GE
Model	PACSystems RX7i
Category	Controller
Language	English