GE PM880 User Manual

Chapter 5. Logging Data
86 Model PM880 Portable Hygrometer User’s Manual
5.6 Viewing Log Setup Details
The PM880 enables you to view more than the log details shown in Log
Manager. The Details command enables you to see the log status, date and
time, length, interval, types of measurements logged and service
information.
5.6.0a Accessing the Log Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Logging and press [ENTER].
3. Use the arrow key to scroll to Log Manager and press [ENTER].
5.6.0b Selecting a Log
1. Use the arrow key to scroll to the desired log. Logs are associated with
the site file in use at the time the log is created or run. If you do not see
the desired log in the list, refer to Viewing All Logs on page 85 to display
all the existing logs.
Note: The list of log files in the Log Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
2. Press [MENU].
3. Use the arrow key to scroll to View and press [ENTER].
4. Use the arrow key to scroll to Details and press [ENTER]. A screen
similar to Figure 38 on page 87 appears.
5. When you are done viewing the log details, press [F3] (Exit).

GE PM880 Specifications

General

Type	Power Meter
Display	LCD
Communication	Ethernet
Measurement Parameters	Voltage, Current, Power, Energy, Power Factor
Power Supply	85 to 265 VAC, 50/60 Hz
Dimensions	96mm x 96mm x Depth (Panel Mount)