Chapter 8. Maintenance and Troubleshooting
138 Model PM880 Portable Hygrometer User’s Manual
8.6 Resetting to Factory Default Settings
The Factory Defaults command enables you to return the meter to its
preprogrammed default settings. The PM880 replaces the default site file
and the global meter settings with the factory default settings. To reset the
meter:
1. Transfer or print all sites and logs. Refer to Chapter 7, Using the PM880
with a PC and Printer.
WARNING! ALL SETTINGS IN THE DEFAULT SITE WILL BE RESET.
BE SURE TO TRANSFER OR PRINT ALL SITES AND LOGS
BEFORE RESETTING!
2. If the menu is not active, press [MENU].
3. Use the arrow keys to scroll to Service and press [ENTER].
4. Use the arrow keys to scroll to Factory Defaults and press [ENTER].
The screen appears similar to Figure 66.
Figure 66: Factory Defaults Window
To Next Page
Loading...
