GE PM880 - Selecting General Log Settings

Chapter 5. Logging Data
80 Model PM880 Portable Hygrometer User’s Manual
5.1 Setting up a New Log (cont.)
5.1.1 Selecting General Log Settings
1. The General tab displays various parameters for log setup. Use the []
key to scroll to Format and do the following:
• Use the arrow keys to make a selection and press [ENTER]. Use the
same procedure for Type.
• To edit text boxes, scroll to the box and press [ENTER]. Use the []
and [
] keys to scroll to the number to change and use the numeric
keys to change the number and press
[ENTER].
Note: If you choose to run a circular log, you will need to enter the number
of records you want to log instead of an end date and time.
2. Use the arrow keys to move to the Measurements tab and press
[ENTER]. A screen similar to Figure 36 appears.
Figure 36: Log Measurements Window