GE PM880 - Transferring a File to a PC

Chapter 5. Logging Data
Model PM880 Portable Hygrometer User’s Manual 81
5.1.2 Selecting a Measurement to Log
1. Use the [] key to step to a box and press [ENTER]. A screen similar to
Figure 37 appears.
Figure 37: Select Measurement Window
2. Use the arrow keys to scroll to the desired measurement type and press
[SEL].
3. Use the arrow keys to scroll to the desired units and press [F3] (OK).
4. Repeat steps 1 through 3 for up to 12 different parameters.
5. When you have finished, press [F3] (Activate) to start the log. The log
will begin at the specified date and time.
Note: If you created the log from within the Log Manager, the meter
returns to the Log Manager, press
[F3] (Exit) and then press
[MENU].
The PM880 returns to taking measurements. A Pencil icon appears in the
bottom right-hand side of the screen.