GE PM880 User Manual

Chapter 1. Getting Started
Model PM880 Portable Hygrometer User’s Manual 17
1.6 Saving Data in a Site File
A site file contains probe ID, calibration data and display setup information
in a file so it can be recalled at the measurement site. Use the following
steps to store the data you have entered into a file (see Figure 9 on page 19
for a menu map):
1.6.1 Accessing the Site Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Site and press [ENTER].
3. Use the arrow key to scroll to Site Manager and press [ENTER].
4. Press [MENU].
5. Use the arrow key to scroll to File and press [ENTER].
1.6.2 Entering a Site Name
1. Use the arrow keys to scroll to New and press [ENTER]. The screen
appears similar to Figure 8.
Figure 8: New Site Name Entry Window

GE PM880 Specifications

General

Type	Power Meter
Display	LCD
Communication	Ethernet
Measurement Parameters	Voltage, Current, Power, Energy, Power Factor
Power Supply	85 to 265 VAC, 50/60 Hz
Dimensions	96mm x 96mm x Depth (Panel Mount)