Chapter 1. Getting Started
18 Model PM880 Portable Hygrometer User’s Manual
1.6.2 Entering a Site Name (cont.)
2. The PM880 displays a default name for the file. If you want to keep the
default name, skip to step 4. Otherwise, use
[F1] to erase the name and
use the arrow keys to scroll to the desired letter or number and press
[ENTER].
3. Repeat this procedure until you have created the desired site name of up
to eight characters.
4. When you have finished, press [F3] (OK).
5. The PM880 prompts you to save the site file as a template. This is useful
if you need to create multiple sites with similar data. At the prompt, do
one of the following:
• Press [F2] (No) if you do not need to use a template, or
• Press [F3] (Yes) if you do want to use it as a template.
Note: If you are saving a new file as a template, the PM880 will ask if you
want to Save Current Site, press
[F2] (No) or [F3] (Yes).
6. Press [F3] (Exit).
7. Press [MENU]. The new site name is displayed in the upper left corner of
the screen. You have completed entering site data.
Next, do one of the following:
• If you are done entering site data, proceed to the next chapter, Taking
Measurements.
• If you need to enter information for another site, go back to Entering
Setup Data on page 7.
Note: If you need to create multiple site files with similar data, you can
save time by creating one site file and then using Save As in the Site
Manager to create a copy of that site file with a different name.
Refer to Renaming a Site File on page 100.
To Next Page
Loading...
