GE PM880 - The Site Manager

Chapter 4. Using Special Features
Model PM880 Portable Hygrometer User’s Manual 49
4.4 Adding a Message to a Site File
The Site Manager has a command that enables you to enter a message or
description for each site file (up to 30 characters). The Site Manager
displays the site message with the other file information. Use the following
steps to add a site message:
4.4.1 Accessing the Site Manager
1. If the menu is not active, press [MENU].
2. Use the arrow key to scroll to Site and press [ENTER].
3. Use the arrow key to scroll to Site Manager and press [ENTER].
4.4.2 Selecting a Site File
1. Use the arrow key to scroll to the desired site.
Note: The list of site files in the Site Manager can be listed chronologically
or alphabetically. Refer to Sorting Files in the Site/Drive/Log
Manager on page 108.
2. Press [MENU].
3. Use the arrow key to scroll to Site and press [ENTER].
4. Use the arrow key to scroll to Message and press [ENTER].
4.4.3 Entering a Site Message
1. Press [F1] (Delete) to delete any unwanted letters or numbers. Use the
arrow keys to scroll to the desired letter or number and press
[ENTER].
To change case or use special characters, press
[SEL] to change the
character pages.
2. Repeat this procedure until you have created the desired site message.
3. When you have finished, press [F3] (OK).
New site information is displayed when the site is selected in Site Manager.
4. Press [F3] (Exit).